New Seat Slider - Introduced May 2004 All 800 series +/- 80mm adjustment Operation instructions 800 Series All 700 series +/- 60mm adjustment Operation instructions 700 Series Models 585 and 565 in the 500 series +/- 80mm adjustment Operation instructions 585/565 Instruction The twist type handle with triangular end can be seen on the above photo just behind the gas height adjustment lever. Turn this lever forward to release the slider and then when you have the positioned your seat depth turn the handle firmly backwards to lock the seat in position. Older Chairs - January 2001 - May 2004 These chairs had a small lever near the back left side of the seat as you sit in the chair, the lever should be pulled up whilst you slide the seat then released to lock the slide - push the lever down to make sure it is engaged. This version gives +/- 60mm on the same models listed above.
|